Blend with the Ninja Blender
1. Follow the assembly instructions. If you have not already done so, you must assemble your mixer before using it. See the instructions that came with the package for instructions for that specific area unit for your Ninja model. Usually you’ll need to put the jar on the bottom and then put the stacked blade assembly on the spindle.
2. Insert the Ninja Mixer. Your mixer will not work unless it is clogged. Make the string and connect it to a socket in your room. confirm that it cannot be simply unplugged at its location
Open the lid. look for an oblong button at the top of the cap. This button should say “release”. Press the button to open and remove the lid.
4. Add your ingredients. Fruit and vegetable zone unit ideal for use inside the blender. it will produce any combination of ingredients that the area unites tasty for you. If you’re using a fruit like a banana or orange, be sure to peel it before spinning it in the blender. Most fruits and vegetables don’t necessarily need to be mashed unless they’re big enough to fit in the blender, but chopping them up first helps liven up the parts. confirm that the lid is closed before selecting a setting.
1. However, you should not use hot ingredients in the blender.
2. You will put ice cubes or frozen fruit inside the blender, but they will pierce the blades. Let the fruit thaw for a few minutes before adding it to the blender.
5. opt for a configuration. it will opt for the heartbeat setting for chopping and processing. Or, you’ll go for speed one, 2, or 3. Speed one mixes, speed two mixes, and speed three ice chops. Press and hold the button to activate the mixer. Hold it down until you are satisfied with the consistency of your ingredients.
• The Pulse setting means the blender can run at full speed, however it will stop blending once you release the button for the heartbeat setting.
6. Use the only service option. Some Ninja models have a service option. the single serve option means it will suffice for just a portion of whatever you want to form. If it’s yours, remove the carafe and insert the cup. Then add your ingredients. Press the only serve option to mix
Ninja Blender Cleaning
1. Wash the lids and blades under the situation. Food will sit still inside the lids and blades over time, which can cause mold. wash the lids and blade assembly under the box once each use. Be extra careful once you handle the blades. they are terribly sharp.
2. Wash carafe by hand. Use a mild, mild dishwashing soap to wash the pitcher and/or cups. Use a sponge to clean up food particles. Then, wash away the soap residue with hot water.
3. Use the dishwasher. Although hand scrubbing is recommended, the jar, cups, lids, and blade assemblies are dishwasher safe. place the blades and lids on the highest rack of your dishwasher. It doesn’t matter where you put the pitcher or cups.
• Cups, lids and blade assemblies are dishwasher safe, but hand scrubbing is recommended as this is the gentlest method of cleaning.
3. Clean the bottom of the mixer. the bottom of the mixer could become dirty or stained over time due to the ingredients born. Wipe the bottom with a clean, damp cloth. do not wet the cord or any wall plug
Fix a blinking red light weight
1. Check that the lid is closed properly. A blinking red light can be a common problem with Ninja Blender. Your mixer will not work if the red light is blinking. To repair this inconvenience, 1st check if the lid is closed. The mixer will not work unless it is closed and secured. The mixer is not attached until it has been pushed down into the instrumentation
2. Confirm that the white arrows on the mixer area unit are aligned. If the lid is closed, but the red light is still blinking, check the arrows on your mixer. There should be a white arrow on the cap and handle. These arrows must be aligned for the mixer to calculate. Move the lid until the white arrow on the lid lines up with the arrow on the handle. Then check if the red light has stopped flashing. If so, you will use the mixer.
3. Match the jar to the bottom of the mixer. Another possible reason for a flashing red light is if the jar is not lined up correctly on the bottom. If you’ve lined up correctly, you should be able to turn. The jug simply won’t spin if it hasn’t been positioned correctly on the bottom. Remove the carafe and place it back on the bottom to determine if this is the problem.
• If the red lightweight still doesn’t get away, contact Ninja Mixer Customer Service for recommendation.
Read more about the best Ninja Blender reviews