We know that using a ceiling fan in addition to an air conditioner in a room can help you save a lot of money. In fact, you can use these units to help lower the temperature by up to 4 degrees. In addition, you will not have any decrease in the feeling of comfort. According to statistics, you can save up to 10% on your electricity bill with these appliances. If you are looking to invest in a ceiling fan, we suggest that you first consider some important features. Some of them are listed below.

Fan

First of all, you need to understand how ceiling fans are classified. You can sort them by the diameter of the blades. You need a bigger unit if you have a bigger room. As a general rule of thumb, a 24- to 42-inch blade is sufficient for a small laundry room. On the other hand, if you have a living room or bedroom, the blade spacing should be 45 to 50 inches.

CFM

CFM is short for Cubic Feet of Airflow Per Minute, which is another important factor to consider. Basically, this figure is representative of the cooling effect you feel when the fan is running. We suggest you go for the higher CFM value so you can save some energy by turning the thermostat down.

Note that a fan with a higher CFM may have a larger motor. As a result, it will require more power to update. However, this expense will be a fraction of the cost of maintaining an air conditioner in the summer. Ideally, the CFM value should be between 6,000 and 7,000 CFM.

Engine

Although a ceiling fan doesn’t cost as much as a new air conditioner, make sure you don’t waste your money. Therefore, we suggest that you look for a product that offers the highest CFM value. Apart from this, the best type of motor produces less noise and does not wobble. Since you will be using this fan for several hours a day, make sure it does not produce a lot of noise.

blades

Usually the first thing you notice when looking at a fan is the blades. Unlike the shape of the blades, the angle and number of blades are more important when it comes to functionality. Today, ceiling fans have 4 to 5 blades. Now, it’s important to note that more blades doesn’t mean the fan will produce more air. The problem is that the greater the number of blades, the greater the resistance. As for efficiency, three blades are enough.

On the other hand, if you are looking for the best deal, you may want to go for a product that comes with 4 or 5 blades. In addition to the number of blades, the angle of the blades is also very important. Make sure the angle is at least 12 degrees.

To summarize, we suggest you consider these factors when looking for the best ceiling fan for your home or office.

Leave a Reply

Your email address will not be published. Required fields are marked *